Temtop M10i Air Quality Monitor

These models are exactly the same except for Wi-Fi. This one has Wi-Fi, allowing you to monitor the air through the Temtop app. In addition you can also do data exports through the app.

Yes, as long as the M10i is connected to Wi-Fi, then you're able to check the readings from the Temtop app wherever you are.

Yes, it is designed to be plugged in continuously if that's preferred. This will ensure readings remain realtime.

Yes, although this model isn't as suited to portability as some of our other Temtop units. This is solely due to the battery life (4-6 hours) and not having Bluetooth, meaning you can only use the app if the M10i is connected to Wi-Fi

Just click the 'Home' button at the top of the monitor to switch between readings (PM2.5, AQI, TVOC, HCHO). Alternatively you can double click the home button to allow it to continuously loop between readings.

It's recommended to calibrate the Formaldehyde (HCHO) sensor every ~3 months. To do this:

• Switch on the M10i and wait for about 10mins
• Press and hold the calibration button (small hole beside USB port) for ~2 seconds using the pin needle tool provided until the HCHO icon on the screen flashes
• Place the M10i outside for 10 minutes to ventilate
• Once the HCHO icon has stopped flashing, calibration is complete

Yes, although it's important to note this does not provide professional/laboratory grade results.

Because of the electrochemical design, some other gases may interfere with the readings. Alcohol (Ethanol) is a common example which can have a big impact.

Yes it uses a backlit LCD screen. If you're sensitive to light at night, you may want to keep it in another room.