12% off ends 30 November
Shop the sale
21 products
Sort by:
21 products
21 products
Replacement H13 HEPA filter for the Smart Air Blast Mini Air Purifier.
HEPA filters capture particulate pollution like PM2.5, dust and pollen. HEPA filters are the most important part of any air purifier, and the key to clean air, so make sure to replace them regularly. The Blast Mini's HEPA can give you up to 7800 hours or 32 months of clean air.
Now friendlier to the environment with a cardboard frame!
Replacement HEPA filter (2 pack) for the QT3 travel air purifier.
HEPA filters capture particulate pollution like PM2.5, dust and pollen. HEPA filters are the key to clean air, so make sure to replace them regularly. The QT3’s HEPA can give you up to 1200 hours or 10 months of clean air.
2x Replacement H13 HEPA filters for the Smart Air SA600.
HEPA filters capture particulate pollution like PM2.5, dust and pollen. HEPA filters are the most important part of any air purifier, and the key to clean air, so make sure to replace them regularly. The SA600's HEPA's can give you up to 4750 hours or 19 months of clean air.
Replacement HEPA filter for the Smart Air Sqair Air Purifier. Your filter may be labelled H12 or E12. They are the same filter (E12 is the newer name for the H12 grade), with the same 99.5% per pass performance and fit.
HEPA filters capture particulate pollution like PM2.5, dust and pollen. HEPA filters are the most important part of any air purifier, and the key to clean air, so make sure to replace them regularly. The Sqair's HEPA can give you up to 2550 hours or 10 months of clean air.
Get your SA700 off the floor entirely. This genuine Smart Air bracket set mounts the SA700 to a wall or ceiling, ideal for clinics, classrooms, offices and homes where floor space is tight, or anywhere you'd rather keep the unit up and out of reach. At only 6.7kg it's light to mount, and performance is identical to floor placement.
What's in the box
Four L-shaped brackets and eight M6×60 masonry anchors for the wall. Note 8x unit mounting screws (M4x16) are included on the SA700 itself. Full step-by-step in the install guide below.
Fixing it to your wall
The supplied anchors are made for solid masonry, so the right method depends on what your wall is built from:
- Brick or concrete: use the supplied 8x M6×60 anchors as per the install guide. Ready to go.
- Timber framing (most NZ homes): don't use the masonry anchors here. Fix into the timber with coach screws or structural timber screws (any hardware store, not included). The bracket fixing points sit 570mm apart and NZ studs are usually 600mm apart, so the tidiest method is to fix a timber backing board across two or more studs first, then mount the brackets onto that.
- Ceilings, plasterboard without solid backing, or anything you're unsure about: have it fitted by a qualified installer. The unit is light, but a solid fixing matters, especially overhead.
What you'll need to fit it
Common to all installs: a screwdriver, a drill, a spirit level, and a pencil. A second pair of hands helps when offering the unit up to mark the holes.
- Brick or concrete: a hammer drill or rotary hammer (a standard drill won't cut masonry well), a 6mm masonry bit long enough to reach 60 to 70mm deep, and a vacuum or blower to clear dust from the holes. The M6×60 anchors are supplied.
- Timber framing: coach screws or structural timber screws to suit (not supplied), a drill bit to pre-drill pilot holes so the timber doesn't split, and timber for a backing board if your studs don't line up with the 570mm bracket spacing.
- Plasterboard or ceilings: fixings depend on the structure behind, so we'd suggest a qualified installer.
Not sure what your wall is made of, or want a hand picking fixings? Get in touch before you order and we'll talk it through.
For timber walls, follow the fixing method above rather than the anchor step in the PDF, which is written for masonry.
1x Replacement pre-filter for Smart Air SA600 air purifier.
Please note pre-filters don't require regular replacement, just a clean to keep them operating well. However if you need a replacement due to damage, look no further!
The Blast Mini Mk II is a durable air purifier with an all-metal construction, ensuring longevity and robust performance. With an impressive Clean Air Delivery Rate (CADR) of 740m³/hour, it can efficiently clean an 85m² space in just 17 minutes, making it perfect for larger areas like offices, classrooms, and hospitals.
Despite its powerful cleaning capacity, it operates quietly, maintaining a maximum noise level of just 49 decibels, ensuring minimal disruption.
Equipped with an H13 HEPA filter, the Blast Mini Mk II captures 99.97% of the most challenging to filter, 0.3 micron-sized particles. It traps dust, allergens, virus-laden droplets including Covid and more. This makes it ideal for demanding environments that require high standards of air quality, like offices, clinics and more.
For those dealing with volatile organic compounds (VOCs) and odours, the optional Activated Carbon Filter effectively removes unwanted chemicals and smells.
The Blast Mk II is a durable air purifier with all-metal construction for long-lasting 24/7 use. It boasts the highest Clean Air Delivery Rate (CADR) in New Zealand (that we've seen!) at 950m³/hour, capable of purifying a 130m² space in just 21 minutes. Despite its power, it operates quietly at only 43 decibels, making it also the quietest high-capacity purifier available.
This purifier features an H13 HEPA filter that effectively captures 99.97% of tricky to filter 0.3 micron sized particles. It traps dust, allergens, virus-laden droplets including Covid and more. This makes it perfect for large areas such as hospitals, offices, retail, classrooms and more.
Additionally, it offers an optional Activated Carbon Filter to remove VOCs and odours, ensuring complete air purification. The Blast Mk II is your go-to solution for maintaining a clean and healthy indoor environment, whether in a home, office, or healthcare setting.
Showing 16/21
Next